Fender Champion 600 Guitar Combo Amplifier (5 Watts, 1×6 in.) vs. Peavey Vypyr Tube 60 Guitar Combo Amplifier (60 Watts, 1×12 in.)
Fender Champion 600 Guitar Combo Amplifier (5 Watts, 1×6 in.)
A fun and affordable tribute to a rare and historic Fender amp. The new Champion 600 is a 5-watt tube amp with a 6 in. speaker and 1950 “two-tone†looks. Fender added a higher-gain preamp circuit to let the overdriven tone exceed that of the original, and they also added a choice of high- or low-gain inputs. Internal speaker jack enables use of a larger speaker cabinet.
Fender Champion 600 Guitar Combo Amplifier (5 Watts, 1×6 in.) Features…Model Name: Champion 600 Model Number: 2330100000 120V USA Series: Vintage Modified Type: Tube Amplifier Output: 5 watts Ohms: 4 ohms Speakers: One 6 in., 4-ohm Special Design driver with ceramic magnet (0073904000) Channels: 2 (Instrument and Microphone) Controls: Volume Covering: Brown and blonde vinyl covering; vintage-correct 1950 “two-tone” cosmetics. Weight: 15 lbs. (7 kg) Dimensions: Tube Complement: Accessories: None Introduced: 1/2007
Buy Fender Champion 600 Guitar Combo Amplifier (5 Watts, 1×6 in.)
|
Peavey Vypyr Tube 60 Guitar Combo Amplifier (60 Watts, 1×12 in.)
Featuring 24 amp channel models — both the clean and distorted channels of 12 popular amps for the first time anywhere — plus 11 editable preamp “stomp box” effects and 11 editable post-amp “rack” effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The Vypyr also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model Vypyr Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface. Vypyr Series With double the processing power, models and effects of competitive modeling amplifiers, the Vypyr Series dramatically redefines the power and scope of modern guitar amplification. Vypyr amplifiers are based on a combination of powerful 32-bit, floating-point SHARC processors and patented TransTube analog circuitry. Featuring 24 amp channel models–both the clean and distorted channels of 12 popular amps for the first time anywhere–plus 11 editable preamp “stomp box” effects and 11 editable post-amp “rack” effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera(TM) II foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The Vypyr also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model Vypyr Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.
Peavey Vypyr Tube 60 Guitar Combo Amplifier (60 Watts, 1×12 in.) Features…60 watts (rms) One 12 in. custom voiced modeling speakers One 12AX7 and four 6L6GC tubes Four channels WYSIWYG (What You See Is What You Get) technology True analog distortion 24 Amp channel models 11 Editable pre-amplifier “Stompbox” effects 11 Editable “Rack” effects 12 On-board programmable presets Up to 400 presets with optional Sanpera(TM) II footswitch Dual parameter FX control Up to five FX simultaneously 32 bit floating point Sharc processor On-board Looper with optional Sanpera(TM) footswitch Chromatic tuner MIDI In/Out Studio quality USB interface MP3/CD/Aux input
Buy Peavey Vypyr Tube 60 Guitar Combo Amplifier (60 Watts, 1×12 in.)
|




Leave a Reply